BLNZS - VISTAC OIL 32X, CPS232502
- MSDS: BLNZS
- Manufacturer: CHEVRON
- Product Name: VISTAC OIL 32X, CPS232502
- National Stock Number: 9150-00N022254
Product Identification
Product ID:VISTAC OIL 32X, CPS232502
MSDS Date:07/20/1989
FSC:9150
NIIN:00N022254
MSDS Number: BLNZS
Responsible Party
US
Emergency Phone: 800-457-2022
Info Phone: 800-582-3835
Cage: 0AHD1
Contractor
Telephone: 800-582-3835
Cage: 0AHD1
Ingredients
LUBRICATING BASE OIL
Fraction By Weight: 90%
ADDITIVES
Fraction By Weight: 4%
PARAFFIN WAXES AND HYDROCARBON WAXES, CHLORINATED;
CAS: 63449-39-8
RTECS: RV0450000
Fraction By Weight: 6%
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:EYES/SKIN:NOT EXPECTED TO CAUSE
PROLONGED OR SIGNIFICANT IRRITATION. THIS HAZ EVALUATION IS BASED
ON DATA FROM SIMILAR MATERIAL. PRACTICALLY NON-TOXIC TO INTERNAL
ORGANS IF IT GETS ON THE SKIN, INHALE D OR SWALLOWED. THIS PRODUCT
CONTAINS CHLORINATED PARAFFIN. A SIMULAR CHLORINATED PARAFFIN
CAUSED AN (EFTS OF OVEREXP)
Explanation of Carcinogenicity:CHLOROPARAFFIN WAXES AND HYDROCARBON
WAXES: GROUP 2B (IARC).
Effects of Overexposure:HLTH HAZ:INCREASE IN TUMORS WHEN GIVEN IN VERY
HIGH ORAL DOSES TO MICE AND RATS FOR THE DURATION OF THERE LIFE
SPAN. LOW LEVELS OR INFREQUENT EXPOSURE TO MATERIAL IS NOT LIKELY
TO CAUSE CANCER OR OTHE R SERIOUS DISEASES.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYES:FLUSH W/FRESH WATER FOR AT LEAST 15 MIN. CONSULT MD.
SKIN:WASH THORO W/SOAP & WATER. REMOVE & WASH CONTAM CLTHG.
INHAL:REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE O2/ARTIFICIAL
RESP) . ING EST:GIVE WATER OR MILK & CALL FOR MD ADVICE. CONSULT MD
BEFORE INDUCING VOMITING. IF MD ADVICE CANNOT BE OBTAINED, TAKE
PERSON & PROD CONTR TO NEAREST MEDICAL EMERGENCY TREATMENT
CENTER/HOSPITAL.
Fire Fighting
Flash Point Method:COC
Flash Point:300F,149C
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICALS, FOAM AND WATER FOG.
Fire Fighting Procedures:USE NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP .
DO NOT ENTER ANY ENCLOSED/CONFINED FIRE SPACES WITHOUT PROPER PROT
EQUIP. PROTECT AGAINST HAZ (SUPP DATA)
Unusual Fire/Explosion Hazard:COMBUSTION MAY PRODUCE TOXIC COMPOUNDS OF
CHLORINE.
Accidental Release
Spill Release Procedures:THIS MATL IS NOT EXPECTED TO PRESENT ANY
ENVIRON PROBLEMS OTHER THAN THOSE ASSOCIATED W/OIL SPILLS. STOP
SOURCE OF LEAK OR RELEASE. CLEAN UP RELEASES AS SOON AS POSS,
OBSERVING SAFETY PRECAUTIONS. CON TAIN LIQ TO PREVENT FURTHER
CONTAM OF (SUPP DATA)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:DO NOT WELD, HEAT OR DRILL CONTAINER.
RESIDUE MAY IGNITE WITH EXPLOSIVE VIOLENCE IF HEATED SUFFICIENTLY.
Other Precautions:CAUTION! DO NOT USE PRESSURE TO EMPTY DRUM OR
EXPLOSION MAY RESULT. READ AND OBSERVE ALL PRECAUTIONS ON PRODUCT
LABEL. KEEP OUT OF THE REACH OF CHILDREN. AVOID PRLNGD/FREQUENTLY
RPTD SKIN CONT W/THIS MATERIAL.
Exposure Controls
Respiratory Protection:NONE NORMALLY REQUIRED, HOWEVER, IF OPERATING
CONDITIONS CREATE AIRBORNE CONCENTRATIONS WHICH EXCEED RECOMMENDED
EXPOSURE STANDARDS, THE USE OF NIOSH/MSHA APPROVED RESPIRATOR IS
REQUIRED.
Ventilation:NONE NORMALLY REQUIRED, HOWEVER, IF OPERATING CNDTNS CREATE
HIGH AIRBORNE CONC OF MATL, SPECIAL VENT MAY BE REQUIRED.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.SKIN CONT CAN
BE MINIMIZED BY WEARING PROTECTIVE CLOTHING.
Work Hygienic Practices:REMOVE CONTACT LENSES IF WORN.
Supplemental Safety and Health
FIRE FIGHT PROC:EFFECTS OF NORMAL PROD OF COMBUST/OXYGEN DEFICIENCY.
SPILL PROC:SOIL, SURFACE WATER/GROUNDWATER. CLEAN UP SMALL SPILLS
USING APPROP TECHNIQUES SUCH AS SORBENT MATL/PUMPING. WHERE FEASI
BLE/APPROP, REMOVE CONTAM SOIL. FOLLOW PRESCRIBED PROCEDURES FOR
REPORTING/RESPONDING TO LARGE RELEASES.
Chemical Properties
HCC:V6
Spec Gravity:0.92 @ 15.6C
Solubility in Water:INSOLUBLE
Appearance and Odor:CLEAR AMBER LIQUID.
Stability
Stability Indicator/Materials to Avoid:YES
MAY REACT WITH STRONG OXIDIZING AGENTS, SUCH AS CHLORATES, NITRATES,
PEROXIDES, ETC.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NORMAL COMBUST FORMS CO2/H2O VAP/MAY
PROD SOX/OXIDES OF PHOSPHORUS. INCOMPLETE COMBUST CAN PROD CO.
Disposal
Waste Disposal Methods:PLACE CONTAM MATL IN DISPOSABLE CONTAINER AND
DISPOSE OF IN A MANNER CONSISTANT WITH APPLICABLE LOCAL, STATE AND
FEDERAL REGULATIONS. CONTACT LOCAL ENVIRONMENTAL OR HEALTH
AUTHORITIES FOR APPROVED DIS POSAL OF THIS MATERIAL.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.